Toothpick canopy (HDZero - ELRS PP / EP2)

Toothpick / micro canopy, this is a light, strong and versatile canopy - 25.5 x 25.5 mounting points.

The canopy houses components:
- HDZero nano HD camera
- New Sport version - (Canopy2021sport.3mf) lower profile canopy, improved mount for ELRS PP or EP2 (no antenna), old version still shown for ImmersionRC zepto RX & Antenna
- Lollipop style vtx antenna

Also see battery mount - https://www.thingiverse.com/thing:4831044
Whoop canopy (small antenna) - https://www.thingiverse.com/thing:5235436

Hardware - M2 countersunk bolts (x4) & M2 nylon nuts (x4)

Fitting is achieved by using M2 countersunk bolts, for the Shark Byte system I use M2x20mm, if you are only using one board then shorter countersunk bolts (10 or 15m) should be used. These are fitted from the bottom with M2 nylon bolts on the top (these are recessed into the canopy).

BetaFPV HX100 SE build - specifications:
Frame - BetaFPV HX100
Flight controller - JHEMCU GHF411AIO F4 - (Previously I had used a Flywoo