Top Edge Display Shelf for Multiboard

This model is for a display shelf for mounting along the top edge of a Multiboard tile wall. For the shelf to fit along the edge, the Multiboard has to be mounted with a greater than 5mm offset from the surface behind it. The Profiles250mm x 100mm Display Shelf175mm x 100mm Display Shelf - a smaller version printable on the A1 Mini.Note: Each profile uses modifiers for strengthening the vertical mounts by increasing the wall count to 3 and adjusting the infill density (to 50%) and pattern (grid) - these I recommend you keep as the increase in filament use is relatively minimal. Installation The shelf mounts are designed to align with the smaller hole pattern of the Multiboard tile. There are bump features that help to align the mounts to the hole recesses … please take care when fitting the mounts onto the tile, do not over spread the mounts as you work them onto the tile. Once the shelf is properly positioned, it may be adequately stable as is for your application but that said, I inc