Top Fuel Eliminator

This is the Top Fuel Eliminator dragstrip slotcar. It comes in two parts that can be screwed or glued together, or both, for a strong fit. It takes all of the normal slotcar parts, but you will have to cut an old axle in half for the front wheels. I used a grinder and a vise to cut it, but a file will also work, but it will take time and work. Stuff in a 16D motor with extra long wires, and the biggest tires you can get. The motor mount unit has a small hole for the small axle used in some slotcars, to use as a wheelie wheel, or the other one takes the standard axle, and front wheels, to use on the back for wheelie wheels. The cover is glued on. Raft or Brim should be used on the long part to keep it from warping. There is an extra support square on the cover that must be removed. The rear spoiler must be glued in place.