Thingiverse
Top mounted mini ITX case
door ProtoSparky
0
Downloads
2
Likes
0
Makes
This is a simple open concept top mounted case for an itx motherboard and atx power supply. It has a space for a 2.5" ssd between the motherboard and power supply.
It is very WIP at the moment, so if you want to print it, be prepared to modify things.
For printing, i recommend to print at 40% infill if you're using PLA.
To assemble the case, you'll need 6 self-tapping screws (for the case), 4 to mount the case mounting bracket, and 3 standoffs for a motherboard. Use a soldering iron to heat the plastic, press the standoffs into place, and then you can use normal screws to mount the motherboard.
It is very WIP at the moment, so if you want to print it, be prepared to modify things.
For printing, i recommend to print at 40% infill if you're using PLA.
To assemble the case, you'll need 6 self-tapping screws (for the case), 4 to mount the case mounting bracket, and 3 standoffs for a motherboard. Use a soldering iron to heat the plastic, press the standoffs into place, and then you can use normal screws to mount the motherboard.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!