Thingiverse

Tormach Jog Controller Handle

by Scoomoo

9 Downloads

3 Likes

0 Makes

Job Controller Handle

This is a handle designed for the Tormach CNC Jog Shuttle Controller. It's ergonomic design and magnetic base add versatility to the controller.

After using the Tormach controller, I found it to be very light weight and a little difficult to hold. This lead to an accidental button press every once in a while, or jogging a liiiiittle too far. So I designed this handle.

It is easy to hold in one hand, and the added weight just feels right.

I originally designed it to include a bar of aluminum in the handle. This is to balance the controller in your hand, and really makes it feel like you're holding a piece of machinery. However I did include an STL of the handle without the pocket for the aluminum.

**Required hardware:**
2x - M3 60mm Socket Head Cap Screw https://www.mcmaster.com/91290A181/
2x - M3 Threaded Insert https://www.mcmaster.com/94459A140/
7x - Magnets https://www.mcmaster.com/5848K12/

**Bolt required to secure weight inside handle:*

case cnc CNC Machine controller handle hand tools holder jog machining magnet magnetic shuttle Tormach tormach 770mx case cnc CNC Machine controller handle hand tools holder jog machining magnet magnetic shuttle Tormach tormach 770mx

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format