Tornado vase

Project revisited!No changes in the model however i optimized a printing profile for both speed and filament use. ~108 gram vs ~171 gram filament~3h30m vs ~5h40(You can get it shorter using sport mode however this will affect the quality of the silk filament) Water-tight? Can it hold water? In my case yes, it can be filament dependent so lets take a look what you need to do.You have to edit your Filament settings in Bambu Studio.Increase the Flow Ratio, mine is set to 1 from initial 0.98. Increase nozzle temp, this can be done in the app, on the printer or in the slicer your choice. I can print this silk filament at 215 normally and now i had to bump this up to 235 for reference.There is no magic number here it will be dependent on the filament you use. And a wild guess you should not run the flow calibration test at the start of the print. But… There is a better way, you can seal the bottom with wood glue, make sure it gets into the corners too and let it dry can take up to 48 hrs for