Thingiverse
Towel Holder
door CNCPILLAR
0
Downloads
2
Likes
0
Makes
Towel holder made of 3d printed parts and a wooden dowel. Designed and made for my bathroom remodel.
printed in white ABS but PLA or PETG will work just fine
Requires a 1 1/4inch wooden dowel like the one below. Cut to the length required. I cut mine to 2 feet and stained it with a dark Stain and coated with a Polyurethane coating. Stain not required but I would recommend some sort of protective coating.
https://www.lowes.com/pd/Madison-Mill-Round-Wood-Poplar-Dowel-Actual-48-in-L-x-1-25-in-dia/3040777
Printed Parts:
3 walls
10% infill
0.2 mm layer height or use Variable layer height to improve quality
print two of the screw covers and press them into the hole after screwing into the wall.
feel free to have the dowel holders go up or down
printed in white ABS but PLA or PETG will work just fine
Requires a 1 1/4inch wooden dowel like the one below. Cut to the length required. I cut mine to 2 feet and stained it with a dark Stain and coated with a Polyurethane coating. Stain not required but I would recommend some sort of protective coating.
https://www.lowes.com/pd/Madison-Mill-Round-Wood-Poplar-Dowel-Actual-48-in-L-x-1-25-in-dia/3040777
Printed Parts:
3 walls
10% infill
0.2 mm layer height or use Variable layer height to improve quality
print two of the screw covers and press them into the hole after screwing into the wall.
feel free to have the dowel holders go up or down
CNCPILLAR publiceert ook op
20 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
