Towel Rail

I tried to print the Door towel rail by chrlg, but the model was not the right size for the cabinet door on my vanity. So I remodelled it to suit my application. This should fit a door 18mm thick. I added a pin to lock the modular rail in place, or you could use a 28mm timber dowel (you will need to reduce the end to 26.5mm) and drill a 6.8mm (ish) hole 13mm from the end. (yes, I realise I did all that backwards...). You can choose from a total length of 330mm or 250mm. Grab the full sets or just the pieces.

If you have kids using the rail (or the towel upon the rail), I recommend you print the pins and brackets separately with at least 80% infill.

This is my first 3D model from scratch, if you run into any issues let me know and I'll see if I can fix it!