Toyota HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 187.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #11 (0.96mm) swap to Sunflower Yellow At layer #14 (1.2mm) swap to Jade White for the rest.