TPU Lid Sleek Containers

TPU Lid Sleek Containers, This design doesn't strictly require the 0.8mm nozzle, but the flex filament is essential. Print Settings Tips (I used Bambu lab P1S): BottleNozzle: 0.8mmMaterial: Clear PETGNozzle temperature: Nozzle temperature varies depending on the filament brand you're using. Perform a temp tower test or similar to find the temperature that gives the highest clarity. For reference, the SainSmart clear PETG I used appeared most transparent between 225°C and 235°C.Layer height: Set it as high as possible within the range that allows for proper printing. I printed at 0.56mm.Line width: 1mmPrint speed: 20mm/s , The faster the print speed, the more transparency is lost.Cooling: If the ambient temperature exceeds 30°C, overhangs may require cooling. I printed overhangs with a fan speed of 20%. The higher the fan speed, the more transparency is lost.Scaling: My bottle prints shrank by more than 2%, so scale adjustments will be necessary. A test model for the bottle is p