Thingiverse
TPU Wheel
by Butterbirne
8
Downloads
3
Likes
0
Makes
Tire: Rim:
r=66mm r=54mm
h= 60mm h=60mm
Bearings: 8x22x7mm (2xSkateboard bearings)
Bearing end to end: 42mm
I used a .8mm Nozzle for both. Use some thicker walls for the Rim to make it stable enough.
The tire was printed at 15%infill with 3 wall layers. Adjust both for your own grip and stiffness requirements.
The Wheel has 4 wall lines with 15%infill.
r=66mm r=54mm
h= 60mm h=60mm
Bearings: 8x22x7mm (2xSkateboard bearings)
Bearing end to end: 42mm
I used a .8mm Nozzle for both. Use some thicker walls for the Rim to make it stable enough.
The tire was printed at 15%infill with 3 wall layers. Adjust both for your own grip and stiffness requirements.
The Wheel has 4 wall lines with 15%infill.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
