Thingiverse
Trackstar One cell ESC replacement case
von istedman
1
Downloads
0
Likes
0
Makes
A replacement case for a Trackstar One cell ESC, used in 1/12th racing. Might work for other, similar ESCs but I don't have one to try. It has thicker walls than the original, needed to do this so it could be printed, it's about 2mm wider/longer than the original
This was my first 3D design, I used it to learn Fusion 360. I have included the native Fusion 360 files if anyone wants to adapt this.
*To ensure the heatsink on the MOSFETs makes contact to the read heat sink, it was necessary to add some neoprene to ESC_Bottom.stl to pad it out. It now works nicely.*
Print using PETG, my original case broke and I wanted a strong replacement.
The two halves are glued together using a hard plastic glue.
This was my first 3D design, I used it to learn Fusion 360. I have included the native Fusion 360 files if anyone wants to adapt this.
*To ensure the heatsink on the MOSFETs makes contact to the read heat sink, it was necessary to add some neoprene to ESC_Bottom.stl to pad it out. It now works nicely.*
Print using PETG, my original case broke and I wanted a strong replacement.
The two halves are glued together using a hard plastic glue.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
