Traffic Light with leds (28cm height)

Hardware
========

- 12xM3 8mm screws
- 3xLEDS (WS2811/WS2812)
- ESP8266
- 18650 battery + holder

Print
=====

### Mandatory parts:

- Cover.stl
- Post.stl
- Head.stl
- Head_cover.stl
- Lights_mask.stl

### For the bottom box you can choose between:
- Bottom.slt (plain box)
- Bottom_with_button.stl (with an hole for 12mm button)

### For the lights cover you can choose between
- Lights_cover.stl (rounded but less light)
- Lights_cover_flat.stl (flat so more light)

Build
=====

- Screw the post on the cover
- Screw the cover on the bottom
- Fix the head to the post, you can use PVC glue or just melt the top of the post with the tip of a soldering iron
- Insert the lights mask inside the head
- Screw the lights cover and head cover on the head

Lights
=====

If you use a led strip, you have to cut the 3 leds and add wire to space leds. The distance between each led is 45mm . They must be installed behing the light mask. Follow the schema to wire e