Thingiverse
train horn
von 5959195user
1.5k
Downloads
1k
Likes
12
Makes
This is a diy train horn that anyone can make at home if they have a 3d printer.
THINGS YOU'LL NEED:
*1 inch inside diameter 1.3 outside diameter pvc
*painters tape or something similar like duct tape
*1/2 inch flexible tubing
*air compressor
*#6-32 x 1/2 inch screws and nuts or something that is about 3.4 mm in diameter and 12 mm or longer with matching nuts
*(optional) glue that bonds to your plastic and pvc
*(optional) T fitting for more than one horn
*(optional) mount for horns http://www.thingiverse.com/thing:1484130
THINGS YOU'LL NEED:
*1 inch inside diameter 1.3 outside diameter pvc
*painters tape or something similar like duct tape
*1/2 inch flexible tubing
*air compressor
*#6-32 x 1/2 inch screws and nuts or something that is about 3.4 mm in diameter and 12 mm or longer with matching nuts
*(optional) glue that bonds to your plastic and pvc
*(optional) T fitting for more than one horn
*(optional) mount for horns http://www.thingiverse.com/thing:1484130
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
