Thingiverse
Trainset Joiner
par MadMansGun
7
Téléchargements
1
Likes
0
Makes
used to connect 2 plywood boards together in a way that levels the boards to each other,
and lets you disconnect the boards when needed.
they are attached to the boards in an alternating pattern, one on the first board, then one on the other.
.\=o==
==o=/.
you will need to print at least 12 of them to join 4 feet of plywood.
the horizontal hole is for locking them together with a m3 Machine Screw.
i made this for a 12 foot long trainset that i am working on that will split into 2 easier to move 6 feet sections.
and lets you disconnect the boards when needed.
they are attached to the boards in an alternating pattern, one on the first board, then one on the other.
.\=o==
==o=/.
you will need to print at least 12 of them to join 4 feet of plywood.
the horizontal hole is for locking them together with a m3 Machine Screw.
i made this for a 12 foot long trainset that i am working on that will split into 2 easier to move 6 feet sections.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
