Trap Door Dice Tower

This is my overly complicated, but very satisfying trap door dice tower.

Suitable for regular dice, D&D dice, and even larger dice like the ones found in Wingspan.

A lot of love went into this dice tower and I hope it brings joy to anyone who decides to print their own!

See included PDF for the full parts list and detailed assembly instructions.

The painted version of the tower shown in some of the photos was painted by a very talented friend. You can follow him on Instagram @archmagos_timo

Dice Tower in Operation:
https://youtu.be/4dce1ql5dGA

Print Settings:

Printed in PLA. If printed correctly, the mechanical components should operate smoothly, without the need for lubrication or much post processing. Sanding parts smooth is likely to cause tolerance issues so using a smooth build plate is highly recommended!


Generally, my print setting ranges were as follows:

Layer height – 0.16mm to 0.20mm
Infill – 20 to 25%
Wall loops – 3 to 5
Top and bottom layers – 3 t