Thingiverse
trashcan / big garbage container
von hallo_ralph
407
Downloads
345
Likes
2
Makes
garbage container
67x67x52mm large trash container.
the container can be mounted completely without screws.
fix the axle of the rolls with a drop of glue.
if you want, you can also fix the rolls with countersunk screws M3 x 8mm (roll_m3.stl).
the lid should be printed with support structure tree (see picture). choose the layer thickness 0.15-0.2mm.
after printing, the lid should be placed on the warm printer bed (60°C at PLA) and the brackets should be bent inwards (with care) to create a slight pre-tension (per side 0.5mm).
https://youtu.be/EjepXAHNXLM
67x67x52mm large trash container.
the container can be mounted completely without screws.
fix the axle of the rolls with a drop of glue.
if you want, you can also fix the rolls with countersunk screws M3 x 8mm (roll_m3.stl).
the lid should be printed with support structure tree (see picture). choose the layer thickness 0.15-0.2mm.
after printing, the lid should be placed on the warm printer bed (60°C at PLA) and the brackets should be bent inwards (with care) to create a slight pre-tension (per side 0.5mm).
https://youtu.be/EjepXAHNXLM
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
