Travel Soap Case

A small soap case designed for traveling with a bar of soap. The bottom part is adjusted so that it has some very small gaps to allow for drying out the soap in the case, without leaking. The lid is in the normal print-set without gaps. The added one features the same gap-design as the bottom to furher enhance drying when the case is closed. Designed to snugly fit a bar sized ~ 65 x 50 x 17 mm (a local brand i typically use). Feel free to adjust the size to fit your favorite brand! The two main parts are sized to fit with slight friction. The bottom part is 0.25mm undersized in x-axis (0.2mm in y-axis), as the zero tolerance fit was almost impossible to open again. If you decide to size the model up or down, please make sure to adjust this parameter (I recommend to keep it at 0.25mm in x-Direction). Feel free to comment on other pattern designs you would like. Enjoy :) Printed with PLA Matte black and scarlet red. Top part with standard settings, bottom: 0.2 layers, 1 wall, 1 top layer