Traxxas Xmaxx Hueforge

Hello All! Im Huml from the Humlshobbies Youtube channel! Figured I would share some of my hueforge rc fun with you. Im still very new to Hueforge so please bare with me while I figure it out! Have fun!!! This model is set up to Pause for color changes. If you have AMS you will have to switch out the pauses with color changes! Thanks! READ BEFORE PRINTING!!! Project: Xmaxx.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Blue At layer #19 (1.6mm) swap to White for the rest.