Thingiverse
Triangular Passthrough
22
Downloads
58
Likes
0
Makes
It's a very simple passthrough object. I chose a gear as the spiral because it seemed interesting and fun.
Filament used for body: Blue PLA by Creality
Filament used for spiral: Yellow PLA by Creality
**Main Settings: **
1) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
2) No supports
3) 15% Gyroid infill for both objects.
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
**If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :) **
Filament used for body: Blue PLA by Creality
Filament used for spiral: Yellow PLA by Creality
**Main Settings: **
1) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
2) No supports
3) 15% Gyroid infill for both objects.
The rest of the settings are pretty standard. All you really need is a finely tuned printer.
**If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :) **
Devilish3DPrints also publishes on
32 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
