Thingiverse

Tricolor 3D Printer

by 3Dadicto

186 Downloads

188 Likes

0 Makes

Tricolor 3D printer

Build volume of 200x200x200mm

Built mainly with aluminum 20x20 and printed parts with a optimized and lightweight design.

The extruder is a Diamond HotEnd. It is designed to change to HotEnd E3D V6.

You can choose between back or side layer fan, although to me, the side fan has given me the best result.

All the commercial elements except for the aluminum profiles and the chrome bars I have bought them on Aliexpress.

https://www.youtube.com/watch?v=6XgTEaBqE9w
https://www.youtube.com/watch?v=DA-88j96Bhw
https://www.youtube.com/watch?v=UrzVpb-7Zio

BOM:
- 2 Screw and nut THSL-300-8Dx1
- Aluminum Profile 20x20 Type I Slot 5mm 2x370; 3x250; 2x390
- 100 Nut slot 6 [M4]
- 12 Linear Bearing LM8UU 8x15x24
- Shaft 8mm Cf53 TOL.h6 2x375; 4x340
- 2 Coupling 5x8
- 2 Pulley GT2 6mm 20 Dientes eje 5mm
- 2 Free Pulley GT2 6mm 20 Dientes eje 5mm
- 1 M Belt GT2 6mm
- 1 GT2 Timing Belt Fixing 9x40mm
- 1 Hot Bed Support Aluminium 220x220x2
- 1 Hot

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

large print

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer