Thingiverse
Tricopter tail pivot V2
por Kezat
39
Descargas
23
Likes
0
Makes
Version two of the tail pivot system with built in landing gear for a Tricopter. Mounts to a 13mm wood boom.
Made for and Inspired by the Batbone from Flitetest.com.
No longer needs lexan plastic sheet to bolt the motors to.
For the front motor mounts see http://www.thingiverse.com/thing:351200
Let me know if you have any suggestions or have a specific motor you want this to be modded for.
IMPORTANT:
If your motors run too hot the PLA could melt causing a failure, for the first few flights monitor the temperature of the motors. I have about 20+ flights with the extra weight of FPV gear and have had no issues.
Made for and Inspired by the Batbone from Flitetest.com.
No longer needs lexan plastic sheet to bolt the motors to.
For the front motor mounts see http://www.thingiverse.com/thing:351200
Let me know if you have any suggestions or have a specific motor you want this to be modded for.
IMPORTANT:
If your motors run too hot the PLA could melt causing a failure, for the first few flights monitor the temperature of the motors. I have about 20+ flights with the extra weight of FPV gear and have had no issues.
Kezat también publica en
15 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
![[Tricopter] Tilt-Mechanism - fits 1/2 inch boom](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2Fee%2F32%2Fcc%2Fc7%2F17%2Faaa11dce566932e87415cbf8ead51639_display_large.JPG&w=400&h=300)
![[Multicopter] Simple landing gear for 1/2 inch booms](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2F92%2Ff9%2F93%2F91%2F34%2Fa374baba70776fa4f4c1b1df72344840_display_large.JPG&w=400&h=300)
