Triple Adjustment Locksleeve SCAR

LockSleeve SCAR but with tension and crush adjustment.Compatible with the original outer sleeve, but it blocks access to the body's crush adjustment wheel while on and requires sanding to get proper alignment with the porting. It also requires shorter pins to not collide.Print Settings:Print with supports for the holes in the body and cap for the crush wheel.Assembly:Insert the chamfered side of the body crush wheel into the SCAR body with the 3mm holes on the side aligned to the slots in the body. Insert the cap crush wheel into the cap with its holes aligned and the thinner portion facing the string holes. Insert short m3 pins or the printed pins into the cap's wheel for toolless adjustment and to lock them in place (leave the flat of the printed pins facing towards the string holes). These wheels can also be adjusted with other tools like the hex key on newer worker blasters.String by feeding both ends of a string through the holes in the body and out the ports. Curl the str