Thingiverse
Triple Clarinet / Flute stand
door cellocgw
1
Downloads
0
Likes
0
Makes
Feb 2026: I strongly recommend using the Rev4 parts, as the legs were redesigned to fit more securely into the center base. Note that the Rev4 parts are not interchangeable with previous revs!
Update: I recommend printing the center hub with a simple cross-hatch infil of 10 or 15 %, then fill the interior with tile grout or Portland Cement or equivalent to add weight and make the whole setup more stable.
I modded some other designs, and deliberately made this one so it can be disassembled for easier transport. The larger peg is for Bb and A clarinets (or for a C flute). The smaller peg is for an Eb clarinet. I haven't tested with a piccolo yet -- possible updates do come.
There's also an "empty" leg that you can use if you only need two or one peg for a given gig.
26 Dec 2025: I added "Rev 3" of the legs which provide more clearance for the clarinet bells.
Note that you may want to wrap the legs with tape where they fit into the hub if they fit too loosely.
Update: I recommend printing the center hub with a simple cross-hatch infil of 10 or 15 %, then fill the interior with tile grout or Portland Cement or equivalent to add weight and make the whole setup more stable.
I modded some other designs, and deliberately made this one so it can be disassembled for easier transport. The larger peg is for Bb and A clarinets (or for a C flute). The smaller peg is for an Eb clarinet. I haven't tested with a piccolo yet -- possible updates do come.
There's also an "empty" leg that you can use if you only need two or one peg for a given gig.
26 Dec 2025: I added "Rev 3" of the legs which provide more clearance for the clarinet bells.
Note that you may want to wrap the legs with tape where they fit into the hub if they fit too loosely.
cellocgw publiceert ook op
33 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
