MakerWorld

Other Tools

triple pulley

by maggieelsawilliam · Other Tools

56 Downloads

20 Likes

26 Makes

this is a pulley i designed in onshape it takes 1 hour 41min to print and 24 grams too print. it reduces the weight of an object by one third.

Category

Other Tools

Source

MakerWorld

Published

27.03.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does triple pulley need supports when printing?

No supports needed for triple pulley — it's designed to print clean off the bed.

How long does it take to print triple pulley?

According to the design notes, triple pulley takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is triple pulley available in?

triple pulley is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is triple pulley free to download?

Yes, triple pulley is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

triple pulley

Similar Models

Add to Collection