Thingiverse
Tripod for halogen
door Indianin666
72
Downloads
49
Likes
0
Makes
Tripod for my two 10W LED lamps.
I used old aluminum ski poles and 20mm diameter aluminum pipe for this project. The poles have a diameter of 16mm.
The elements are connected with M5 screws.
Lamps were attached to an aluminum profile, which I used in the construction of the light pad: https://www.thingiverse.com/thing:4062120
The profile has a dimension of 28x18mm
At the bottom of the tripod is a 12V power supply socket, and the electric wires are in the 20mm pipe.
I used old aluminum ski poles and 20mm diameter aluminum pipe for this project. The poles have a diameter of 16mm.
The elements are connected with M5 screws.
Lamps were attached to an aluminum profile, which I used in the construction of the light pad: https://www.thingiverse.com/thing:4062120
The profile has a dimension of 28x18mm
At the bottom of the tripod is a 12V power supply socket, and the electric wires are in the 20mm pipe.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
