Thingiverse
Tripod Sleeve v.2
por Utahn
0
Descargas
0
Likes
0
Makes
Created from part.
Tripod information unknown.
Recommend 4-5 walls or high infill.
Increased the holes for the legs by 1.096%
Increasing ID by 1.5mm or roughly 1/16"
1.5875mm = 0.0625"
1.5000mm = 0.0591"
Figured .003" difference was negligible, and made for easer numbers.
ever so slightly thinner than a sheet of basic copy paper.
Tripod information unknown.
Recommend 4-5 walls or high infill.
Increased the holes for the legs by 1.096%
Increasing ID by 1.5mm or roughly 1/16"
1.5875mm = 0.0625"
1.5000mm = 0.0591"
Figured .003" difference was negligible, and made for easer numbers.
ever so slightly thinner than a sheet of basic copy paper.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!