Triptych Display: Pokemon Hueforge

Continue my Pokémon series: There are four print files included each of which should be printed separately. Do not adjust any print settings—they are already configured with pauses for color swaps.Once printing is complete, simply insert the three HueForge pieces into the three panels of the folder. The dimensions have been carefully calculated with precise tolerances, ensuring that the inserts fit securely while still being easy to place.For disassembly, you can use tweezers to slide into the tolerance gap, allowing the HueForge piece to be removed effortlessly. Project: Pokemon Logo + Trifold.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm Filaments Used: #000000 PLA Basic Black Transmission Distance: 0.1 #0000ff PLA Blue Transmission Distance: 1.6 #0086d6 PLA Basic Cyan Transmission Distance: 2.4 #c00d1e PLA B