Tron Ares poster - hueforge

Hueforge of Tron - Ares posterThe photos shows the result in 136.84x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament at the specified heights. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 136.84x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1mmThe Max allowed Thickness is 2.76mm and the Actual Thickness is 1.76mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #23 (1.08mm) swap to Red At layer