Tronxy E3D V6 Holder

This is the remix of my Holder with part cooling mount. This one doesn't have a cooling mount.

The mount requires 4XM3 nuts and screws for the clamp and the fan. I highly suggest adding spacers.
My first version had slots to drop in the nuts and screw but the PLA kept cracking with the pressure. So this version you have to press in two nuts. for the back (see picture).
The mounting the holes are for M4 screws of the radial fan, but I suggest using some M3 to give you wiggle room.
I've done multiple iterations of the duct and the one present is the one I found the most effective. Knowing that I worked with a CAD of the full assembly I've allowed myself only a 1mm gap in the Z axis between the nozzle tip and the duct (Subject to the hotend you have if a replica.) It simply is press fitted in the fan, don't need to glue it.

My stock fan had a broken wire so I replaced it with a blower to have better cooling and drilled some holes in the plastic clip. I used the E3D V6 Blower Fan