Tronxy X3 NO CONTROLLER BOX!

I've been wanting to get rid of the external controller box on my Tronxy printers since I built the first one. I now have four of the X3A printers and the controller box takes up too much room and moving the printers with it attached is not fun either. No reset button access and the power switch is difficult to reach if you place the controller under the printer not to mention the SD card........

The graphic of the whole design needs up dating once I get everything completed. What has changed is the power supply (both the 20 or the 30A) has moved to the outside of the frame due to interference of Z axis stepper mounting bracket. The Melzi controller box now hangs lower so that the separate mounting brackets could be eliminated. The cable box (if used) will need to move to the back of the printer. The Melzi controller is soooooo long! The controller case takes up most of the right side of the printer.

My goal was to be able to re-use as much of the controller box parts as possible