Truck ( hueforge )

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Tough Vermilion Red Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Matte Ivory White Transmission Distance: 4Swap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Vermilion Red At layer #16 (1.36mm) swap to Silver At layer #22 (1.84mm) swap to Ivory White for the rest.