Trump Hueforge

Project: TRUMP .hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.61mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used: PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Dark Blue At layer #7 (0.64mm) swap to Blue Gray At layer #8 (0.72mm) swap to Orange At layer #12 (1.04mm) swap to White for the rest.