TTraK Module Clamp

Module Clamp for two TTrak Modules with Low Scenery. Allows the modules to be stored or transported vertically in a scalable fashion. Additional Hardware is Required

Bolts: 4 per clamp. Sized for 1/4" bolts, 2.5" length minimum, suggest a little longer to make threading the nut easier.

Washer: 4 per clamp. (Optional but recommended) Since this is 3D printed this will better distribute the lateral force on the printed parts when clamped. Any will work as long as the hole can accommodate the 1/4" bolt.

Nut: 4 per clamp. One for a 1/4" bolt, a nut with flange can take the role of the washer.