Tunk Cargo Block

The OEM cargo block holder thing that came with my car has been heavily utilized by me but I wanted more. Using the OEM cargo block holder as an influence, I have created my own that prints in two separate pieces. I have tested this out for about 3 months and it works just as well as the OEM one. Print Instructions: The one pictured was printed in PETG-CF with the grippers being printed in TPU. I recommend using at least 3 walls and 10% infill. Print the Cargo Block on it's side as shown in the image with supports mirroring what's also shown in the reference image. Areas of improvement: I had to reduce the area of the grippers as my first version did not fit in the cargo block so there is about 2-3mm of play forward and aft after the grippers are inserted into the bottom of the cargo block. They should stay in place on their own but I for my own peace of mind used a few drops of hot glue but you can use whatever 3d-printing friendly glue you'd like if you choose to do so. As I know som