Slicer Discord
TurboFan露营可变喷口风扇 – 3D printable model from MakerOnline MakerOnline
TurboFan露营可变喷口风扇 – Bild 1 TurboFan露营可变喷口风扇 – Bild 2 TurboFan露营可变喷口风扇 – Bild 3 TurboFan露营可变喷口风扇 – Bild 4
Hobby&DIY

TurboFan露营可变喷口风扇

60 Downloads
50 Likes
0 Makes
Go to Model
露营风扇_TurboFan - 小红书 组装文档: 配件介绍: 1.风扇电机选用3510h,大疆的拆机电机,电调选用20a及以上即可,电调测试仪为小型; 2.微喷口电机为N20减速电机,转速越慢越好; 3.降压模块为固定输出5v,可自行购买,蓝牙模块可自行购买,支持12v电压即可; 4.充电接口选用直径10mmDC5.5*2.1,可自行购买; 5.总开关选用直径12毫米自锁开关; 6.电池为12v,带保护板即可,容量可根据自己需求选择,也可自组电池或直接DC电源直供; 7.喇叭选用64mm以内即可,螺丝固定孔距离55mm(对称); 8.如有任何疑问可小红书私聊我,可随时解答 小红书连接如下:PathfinderANT - 小红书
Category
Hobby&DIY
Source
MakerOnline
Published
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Est. print time
10 h
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

PathfinderANT also publishes on

124 additional models across 1 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection