Turnable decapping device for honeycombs

Turnable device for decapping honeycombs (replica of "Nassenheider Inverto"). Especially usefull for using a hot air decapping gun in one hand. Application video original: You will need: -) 1 x 2020 aluminium profile type 6 B, length = 377 mm (for austrian "Einheitsmaß" with a length of 370 mm) -) 2 x 2020 aluminium profile type 6 B, length = 130 mm (for austrian "Einheitsmaß" with a length of 370 mm) -) 2 x 2020 internal corner brackets type 6 B -) 2 x 2020 type 6 B M5 hammer nuts + bolts -) 6 x M4 bolts + nuts Use the drilling template to drill the four 4 mm holes inside the decapping box (do not scale the pdf when printing, otherwise the dimensions do not match!). Edit: 08.07.2020: I think it's better to not mount the two short beams on the side of the long one like I did but on the upper surface. It's then easier to change the distance/width of the frame spacers because they are moveable. Print Settings Printer: HEVO RS Rafts: NoSupports: No Resoluti