MakerWorld

Other Hobby & DIY

Turntable for Airbrush

by AndyF_CH · Other Hobby & DIY

147 Downloads

95 Likes

75 Makes

Turntable for Airbrushing. Easy to Print, Easy tu use.Need 2 Bearings Type 6700zz (15x10x4.5mm).Printtime +/- 4hrs, no Supports.Bearings and Connector with snap Fitting.

Category

Other Hobby & DIY

Source

MakerWorld

Published

14.01.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

4 h

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Turntable for Airbrush need supports when printing?

No supports needed for Turntable for Airbrush — it's designed to print clean off the bed.

How long does it take to print Turntable for Airbrush?

According to the design notes, Turntable for Airbrush takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Turntable for Airbrush available in?

Turntable for Airbrush is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Turntable for Airbrush free to download?

Yes, Turntable for Airbrush is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Turntable for Airbrush

Similar Models

Add to Collection