Turret milling machine

This is based on real turret milling machine,I made it to a 3D print version with some dimensional tolerance adjustment.
It comes with 25 parts,weight about 650g,(with 10% infill,1.2mm shell thickness & support material)
I sugget use 210x210x210mm (or above)print platform printer, print those parts one by one to get better result.Some parts are interference fit,might need some sanding progress.
The ''B3''&''B4'' , ''D7''&''D9'' are bolts and nuts, when you assemble them don't screw them too tight or it might broke or crack.

With lots of combination parts, different machine, material, software setting might affect the final result. I highly suggest you to print some test parts to make sure the size is accurate to work well, then print this milling machine to avoid printing failure & waste your filament.

此作品是參考銑床的機構進行設計，我設計一些適合3D列印的零件加入其中，並搭配大部分3D列印產生的尺寸公差做零件的尺寸調整。

此成品包含25個零件，總重量約650g(10%填充，1.2mm壁厚，含支撐材料)，
適合210mm*210mm*210mm以上機台列印，建議一次只列印一個零件，有幾個零件設計為緊配合，可能需要稍微磨過，B3-B4與D