Turtle Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z.The Model is 230.99x153.9mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #14 (1.2mm) swap to Blue GrayAt layer #17 (1.44mm) swap to GrayAt layer #26 (2.16mm) swap to White for the rest.