Twisted Lamp

I used a cheap E27 lamp socket I had at hand for one of the IKEA Tradfri bulbs for smooth illumination of the living room. The socket I used had an outer diameter of 38 mm and a length of roughly 60 mm, which is pretty standard but obviously the part which holds the socket is not usable with every socket.
Everything fits quite tight with my printer and and zero clearance. It might be obvous, but I would not use non LED bulbs with this design.

The prints came mostly out quite nicely. I used supports only for the internal structures in the lower part and for the shade. The shade in my first try had some stringing on some corners in the lower third.