Two Gnomes Repelling

I have made this model free for two reasons. The first is that the models are imperfect, there are flaws in them and the are difficult to paint even for me. The second is printability, both models are pretty hard to print. They will require intricate tree supports and you may have to add more manually. I had to resin print with my Halot and a lot of support (90%) and I finally got two prints I could paint and be satisfied with. I have included sliced files for the K1 max (these files are sliced at a very low speed and may work for you) I was able to print this slice successfully but the required supports were pretty hard to remove!If you successfully slice please post Thank you for understanding this is still a work in progressThese two love hanging out! You will need supports to print these two and I highly recommend light tree supports as I have had success with them. Fun to paint with and easy color scheme. Tt. Please post a make if possible. It really "Makes" My day. Remember a Happy Gnome is a Happy Home.You will need some small twine to string the two together.This is very important please note. This model was created using the Creality Scan Lizard or the Creality Scan Ferret Pro. By itself, without paint, it will not have the definition you see on the photo page. The photo page image is of this model that I printed and painted. That said I have been painting for a very long time. It took me many years to learn to add shading and definition. This can be extremely challenging and even seem overwhelming when you firat start to paint models. Please be patient and practice as much as you can the end product can be very satisfying. Please message me if you have any questionsPrinting Slicer Software Creality PrintPrinter Crality K1Material Hyper PLANozzle .04 @ 215Bed 55Layer Height .2Speed 100mm/ (K1)Supports YesScan Ferret Pro can be purchased herehttps://store.creality.com/products/cr-scan-ferret-pro-3d-scanner?spm=..page_11427365.header_1.1&spm_prev=..login.