Two piece quad frame

Simple two piece quad frame.
The frame is 170mm and uses 4" props. (in my case 4045 4-blades)

I wanted a frame for some old 1806 motors and other disused parts.
But any motors that can swing a 4" prop and matching ESC and FC will do.

The height 8 standoffs needs to be adapted to match the height of the PDB and any components below it.

I used the following parts.
DYS BE1806
https://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-Black-Edition-for-Multicopters-p-946416.html
Naze32 Rev5
https://hobbyking.com/en_us/afroflight-naze32-acro-funfly-controller.html
4045 props
https://hobbyking.com/en_us/dalprop-q4045-bull-nose-4-blade-propellers-cw-ccw-set-green-2-pairs.html
ESC
https://hobbyking.com/en_us/dys-blheli-16a-mini-esc-with-soldering-pin-option-2-4s.html
PDB
https://hobbyking.com/en_us/super-mini-power-distribution-board-w-twin-bec-5v-12v-for-cc3d-revo-flight-controllers.html
Micro Camera and VTX
https://hobbyking.com/en_us/q25-mini-vtx-and-camera.html

Y