Thingiverse

Two simple planters

by Namurei

37 Downloads

40 Likes

0 Makes

Two planters (5 minute design in FreeCAD) as solids, perfect for vase-mode printing. They are cca 110-120 mm tall and they can be printed in less than an 50 min.

This is really simplest design possible, but I have tried to pin geometric golden ratio and some people really like them (too much) :)

I'm usually printing them with 0,8 mm nozzle (0,4 is fine!) in vasemode, with 0,3 - 0,36 mm line heuight resolution and with fuzzy surface. Fuzzy surface takes longer - around 2-3 hours to print depending on your printers speed.

For more pictures, please visit my Insta profile @Namu3D ... and I will try to upload more pics later :)

Enjoy and visit me on instagram @Namu3D

cactus cactus cup cactus planter cactus pot golden ratio planter planters planter pot vase VaseMode vase mode cactus cactus cup cactus planter cactus pot golden ratio planter planters planter pot vase VaseMode vase mode

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

200 mm (Large)

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Two simple planters?

Any FDM printer should handle Two simple planters just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Two simple planters need supports when printing?

No supports needed for Two simple planters — it's designed to print clean off the bed.

How long does it take to print Two simple planters?

According to the design notes, Two simple planters takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Two simple planters available in?

Two simple planters is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Two simple planters free to download?

Yes, Two simple planters is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Two simple planters

Similar Models

Add to Collection