two tiered organiser · modular print

tiered organisermodular print with optional magnets to lock into position this is a modular print that consists of the following components:base (use of 2x 6mmx3mm magnets optional)top (use of 2x 6mmx3mm magnets optional)pillar x2 (use of 4x 6mmx3mm magnets optional)shelfIf you choose to, you'll need 8 6x3mm magnets to achieve the same result as shown in the pictures, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot. Alternatively you can use only glue to fix the pillars in placenotesplease make sure that you are very mindful of the polarities of the magnet when assembling and gluing in their spots as you want to make sure that each section attracts and not repels the one that will sit above/belowcomponents are designed with small tolerances to ensure a perfect tight fit, so make sure that you have your machine calibrated and filament dry so that you don't run into any tolerance issuesthe pillars requir