Type 2 EV charging plug and cable hanger.

Plug and cable hanger for type 2 EV charging cable. Model can be easily adjusted for different weatherboard angles. The plug is released by gently lifting the handle slightly before pulling out. The angle of the socket matches that of an Evnex wall charger.

Edit: in response to comments that it's a bit on the tight side (see comments below), I have edited the scad file with a "plug clearance" parameter. In my experience, the hole in the print ends up about 0.4mm smaller than the model, and having the hole 0.7mm oversize in the model, as per the original design, results in a nice fit when using a creality printer and 0.4mm nozzle. However, it appears that not everyone is getting the same result. I recommend trying the type 2 plug holder test file first, and adjusting as necessary. For those who don't want to mess around with parametric models, I have also uploaded "clearance" versions of the STL files, with an additional 0.2mm on the socket diameter, as well as test ring STL files fo