Thingiverse
UART TTL Board Enclosure
par ldparenteau
1
Téléchargements
0
Likes
0
Makes
This is an enclosure for a UART TTL board like this one [https://www.aliexpress.com/item/32801557756.html?spm=a2g0s.9042311.0.0.dcd44c4d4fxiCi].
In addition to the 3D printing I went through the trouble of making little "light pipes" for the 3 LEDs on the board. I used the "thick" clear plastic from typical chocolate boxes (e.g. Ferrero Rocher and the likes). Sawed and sanded until it fits in the little square holes in the enclosure. Secured with a bit of crazy glue. Adds a nice touch but by no means necessary.
Note that for a result where you can actually read the pin labels, you need a 0.2mm nozzle.
In addition to the 3D printing I went through the trouble of making little "light pipes" for the 3 LEDs on the board. I used the "thick" clear plastic from typical chocolate boxes (e.g. Ferrero Rocher and the likes). Sawed and sanded until it fits in the little square holes in the enclosure. Secured with a bit of crazy glue. Adds a nice touch but by no means necessary.
Note that for a result where you can actually read the pin labels, you need a 0.2mm nozzle.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
