Ubertooth / YARD Stick One Case

I got tired of waiting for the cases I wanted to become available again on Tindie, so I designed my own with some improvements.

This case is designed to screw together with 4 M2.5 8mm screws and nuts and can optionally include a label for each and a cutout for the expansion ports.

You only need 1 top ("T") and 1 bottom ("B") file for the options you wish, or you can use the included scad file and render/modify to your hearts content.

The files starting with "UT" are for the Ubertooth One, and those starting with "YS" are for the YARD Stick One. "Exp" in the file name indicates that cutouts for the expansion port are provided (it's tight in the vertical to provide a .4mm (two walls when printed at 0.20 resolution) wall along the edge of the cutout, but standard 2.54mm pins should fit fine. "Label" in the file name for the "T"op files indicates that the top 3 layers of the STL file are the title label for the device -- you can use your slicer to indicate a color change at this p