Thingiverse
UBlox GPS Case
por Cynetics
28
Descargas
8
Likes
0
Makes
A small box to hold a Crius UBLOX Neo 6M GPS unit on a MultiCopter.
Very straight to forward print.
I've allowed a little space internally as the Crius units generally don't have the antenna lined up straight. The hole in the lid is slightly oversized also.
3mm holes for screws that hold lid on and mount the unit on the frame.
This unit will stack above my mavlink-OSD case..
http://www.thingiverse.com/thing:2280177
You can print without supports but I found the hole for the cable is better if you use supports.
stl's created in FreeCad.
I printed in ABS. Should be good with PLA.
PLEASE LET ME KNOW IF YOU FIND THIS USEFUL.
(Send me a picture )
Very straight to forward print.
I've allowed a little space internally as the Crius units generally don't have the antenna lined up straight. The hole in the lid is slightly oversized also.
3mm holes for screws that hold lid on and mount the unit on the frame.
This unit will stack above my mavlink-OSD case..
http://www.thingiverse.com/thing:2280177
You can print without supports but I found the hole for the cable is better if you use supports.
stl's created in FreeCad.
I printed in ABS. Should be good with PLA.
PLEASE LET ME KNOW IF YOU FIND THIS USEFUL.
(Send me a picture )
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
