Thingiverse
Uebler I31 Camera Mount
von gimbogandalf
0
Downloads
0
Likes
0
Makes
Reverse camera mount for [Uebler i31 bike rack](https://www.uebler.com/en/portfolio/towbar-bike-rack-i21-i31/).
Notes:
1. It may fit other models as well like i21 but I didn't check it
2. The locking itself is done with a standard gopro screw and bolt. The bolt should be mounted in its place (in my print it holds it well without glue. if needed you can glue)
3. The camera model I used is [this](https://www.aliexpress.com/item/1005003243330048.html). It works well (no night vision though).
4. When camera is connected, you cannot fold the rack.
5. There is a long M5 thread on the side of the mount so you can make a hole in the rack and fasten it to the bike rack with a long M5 screw but in my print it holds VERY tight without screwing anything
Notes:
1. It may fit other models as well like i21 but I didn't check it
2. The locking itself is done with a standard gopro screw and bolt. The bolt should be mounted in its place (in my print it holds it well without glue. if needed you can glue)
3. The camera model I used is [this](https://www.aliexpress.com/item/1005003243330048.html). It works well (no night vision though).
4. When camera is connected, you cannot fold the rack.
5. There is a long M5 thread on the side of the mount so you can make a hole in the rack and fasten it to the bike rack with a long M5 screw but in my print it holds VERY tight without screwing anything
gimbogandalf veröffentlicht auch auf
5 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
